<div dir="ltr">I'm trying to simulate up a 4 disk chopper system, as used in Platypus (ANSTO) or FIGARO (ILL). For those disks the window opening is at 3 o'clock, rather than 12 o'clock.<div><br></div><div>To account for this I rotate the DiskChopper component as "ROTATED (0, 0, +90) ABSOLUTE". When I run a trace the disk window is rotated clockwise to 3 o'clock, which is what I wanted, and which indicates that a positive angle refers to a clockwise rotation (i.e. a right hand coordinate system).</div><div>I therefore assume that a positive rotation frequency (`nu > 0` corresponds to a clockwise rotation when looking from the source to the detector (from -z to +z). Is this correct?</div><div><br></div><div>However, when I set the `phase` of the DiskChopper to +30 the window of the disk in the trace appears to have moved anticlockwise when looking down the beamline. This is the opposite to what I would have expected, +ve angle moving things clockwise. It's not clear to me what phase means in this situation, can someone clear up my confusion please?</div><div><br></div><div>Andrew.</div><div><br></div></div>