full screen problem ok

[Dr. Georg Artus]

Hello Kristian,

the full screen problem with mcplot is clear now! Yesterday I had only
one detector in my instrument. So mcplot plotted this detector already
in enlarged size! Therefor I thought clicking would enlarge the window
to full screen size! I'm sorry for the confusion about this! It works if
you have more than one detector in the instrument.

Two more remarks:
I had five detectors, so three in the upper row and two (left and middle
position) in the lower. Clicking on the detecotr in the upper right
corner (third one) produced a full window size of the detector in the
middle of the  lower row. Enlarging the third detector was not possible.
I would like to know how one can use mcplot with a gscan output. I've
tried several things but nothing works. I haven't found it in the
manual.

Best wishes,

Georg
-- 
*********************************************

Dr. Georg Artus
Technische Universitaet Muenchen
Neue Forschungsneutronenquelle Garching
D-85747 Garching

Tel: +49 (0)89/289-14675
Fax: +49 (0)89/289-14666 or 12112
E-mail: gartus at ph.tum.de