calling mcstas 1.4.2 ...

[Stuart Rycroft]

Hi

I encountered the same problem.  After a little time I noticed that there
was a problem in the ARM component which should have the line

POLARISATION PARAMETERS (sx,sy,sz)

not

POLARISATION PARAMETERS ()

It worked when I changed it.

Stuart Rycroft

On Mon, 23 Apr 2001, Ulrich C. Wildgruber MPI fuer Metallforschung
Stuttgart wrote:

>>Hi everybody,
>>
>>I just started to use 1.4.2 and experience a little problem.
>>The command 
>>		mcstas xyz.instr
>>
>>leads to:
>>
>>mcstas GMonochromator_2.0.instr
>>parse error, expecting `TOK_ID' at line 31.
>>
>>
>>Fatal error: Errors encountered during autoload of component Arm.
>>
>>
>>Program aborted.
>>
>>Looks like my installation is wrong although I did it exactely the same
>>way as before (and not only once but several times...) and tried instr-file
>>which compiled without any problem before. I couldn't find any further
>>information on the mcstas webpage or in the manual to shed light on this
>>behaviour of mcstas. Any comment/advice/help is appreciated.
>>
>>Thanks!
>>
>>Uli
>>
>>-- 
>>Ulrich WILDGRUBER
>>wildgrub at dxray.mpi-stuttgart.mpg.de
>>wwwmf.mpi-stuttgart.mpg.de/abteilungen/dosch/dosch.html
>>-----------------------------------------------------------------------------
>>Max-Planck-Institut für Metallforschung	| Technische Universität München
>>Heisenbergstr. 1		        | ZBE Neue Forschungs-Neutronenquelle
>>					| Instrumentierung
>>D-70569 Stuttgart			| D-85747 Garching/München
>>Tel.: (+49)-711-689-1900		| Tel.: (+49)-89-289-14681
>>Fax.: (+49)-711-689-1902		| Fax.: (+49)-89-289-14666
>>

Stuart Rycroft
Interfaculty Reactor Institute (IRI)
Delft University of Technology
Mekelweg 15
2629 JB
Delft
Netherlands

Tel: (+31) 015 278 3900